What is the reason for the high-temperature rise of the Best Toggle type Injection Molding Machine-650T~980T
1. The fuel tank volume of the Best Toggle type Injection Molding Machine-650T~980T is too small, the heat dissipation area is not enough, and the cooling device is too small in capacity.
3. The unloading circuit in the Best Toggle type Injection Molding Machine-650T~980T system fails or because the unloading circuit is not set up, the oil pump cannot be unloaded when it stops working, and the entire flow of the pump overflows under high-pressure, resulting in overflow loss and heat, resulting in temperature rise.
4. The system pipeline of the Best Toggle type Injection Molding Machine-650T~980T in china is too thin and too long, the bending is too much, and the local pressure loss and the pressure loss along the process are large.
5. The matching clearance of the matching parts of the Best Toggle type Injection Molding Machine-650T~980T is too small, or the clearance is too large after use and wear, and the internal and external leakage is large, resulting in a large volume loss, such as a decrease in the volumetric efficiency of the pump and a rapid temperature rise.
6. The working pressure of the hydraulic system of the Best Toggle type Injection Molding Machine-650T~980T is adjusted much higher than the actual need. Sometimes it is because the seal is too tight, or because the seal is damaged and the leakage increases, the pressure has to be increased to work.
7. When using the Best Toggle type Injection Molding Machine-650T~980T, choose the viscosity of the oil inappropriately. If the viscosity is large, the viscous resistance will be large. If the viscosity is too small, the leakage will increase. Both conditions can cause heat generation and temperature rise.
RELATED NEWS
Provide global customers with real-time business and technical services
The founder has been working in injection molding machines in Taiwan more than 40 years.
Continuously develop and design new products and pay attention to product quality
In order to differentiate two-plate machine market, Twintop Intelligent Machinery was officially established in Ningbo in 2021
There are offices and service centers in Anhui, Wuxi, Dongguan, and Taiwan. There are agents in Indonesia, Thailand, and Mexico overseas, providing instant business and technical services to global customers.
Provide global customers with real-time business and technical services
The founder has been working in injection molding machines in Taiwan more than 40 years.
STAY POSTED
They can customize products according to different industry categories
CONTACT TwintopCONTACT
Add: No. 266, Qindu East Road, Cixi Binhai Economic Development
Zone, Zhejiang Province
Tel：+86-13777228573
E-mail：sales@twintop.cn
Copyright © Ningbo Twintop Intelligent Machinery Co., Ltd. All Right Reserved Powered by www.300.cn SEO Business license